Ford 2006 Explorer v.2 Manual de usuario descargar pdf (Pagina 286)

WINDSHIELD WASHER FLUID

Add fluid to fill the reservoir if the

level is low. In very cold weather, do

not fill the reservoir completely.

Only use a washer fluid that meets Ford specification WSB-M8B16–A2.

Do not use any special washer fluid such as windshield water repellent

type fluid or bug wash. They may cause squeaking, chatter noise,

streaking and smearing. Refer to Lubricant specifications later in this

chapter.

State or local regulations on volatile organic compounds may restrict the

use of methanol, a common windshield washer antifreeze additive.

Washer fluids containing non-methanol antifreeze agents should be used

only if they provide cold weather protection without damaging the

vehicle’s paint finish, wiper blades or washer system.

If you operate your vehicle in temperatures below 40° F (4.5°C),

use washer fluid with antifreeze protection. Failure to use

washer fluid with antifreeze protection in cold weather could result in

impaired windshield vision and increase the risk of injury or accident.

Do not put washer fluid in the engine coolant reservoir. Washer

fluid placed in the cooling system may harm engine and cooling

system components.

Checking and adding washer fluid for the liftgate

Washer fluid for the liftgate is supplied by the same reservoir as the

windshield.

2006 Explorer (exp)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

286

1 2 ... 281 282 283 284 285 286 287 288 289 290 291 ... 335 336

Sin comentarios

Ford 2006 Explorer v.2 Manual de usuario Pagina 286