Ford 2000 E-150 Manual de usuario descargar pdf (Pagina 189)

3. Push each clip tab toward the

engine compartment and lift upward

to the stop position.

4. Remove the headlamp assembly.

5. Disconnect the electrical

connector from the bulb by pulling

rearward.

6. Remove the bulb retaining ring by

rotating it counterclockwise (when

viewed from the rear) to free it

from the bulb socket, and slide the

ring off the plastic base. Keep the

ring to retain the new bulb.

7. Without turning, remove the old

bulb from lamp assembly by gently

pulling it straight back out of the

lamp assembly and replace.

To install the new bulb:

Handle a halogen headlamp bulb carefully and keep out of

children’s reach. Grasp the bulb only by its plastic base and do

not touch the glass. The oil from your hand could cause the bulb to

break the next time the headlamps are operated.

1. With the flat side of the bulb’s plastic base facing upward, insert the

glass end of the bulb into the lamp assembly. You may need to turn the

bulb left or right to align the grooves in the plastic base with the tabs in

the lamp assembly. When the grooves are aligned, push the bulb into the

socket until the plastic base contacts the rear of the lamp assembly.

Maintenance and care

189

1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 231 232

Sin comentarios

Ford 2000 E-150 Manual de usuario Pagina 189